Wooden bear head — large size 48 cm
99,90 €
Plywood 3D puzzle 5 mm (reinforced thickness) to self-assemble. 48 × 45 × 36 cm. Assembly plan included. Made in France, shipped in 24/48h.
Description
There is a difference between a decoration and a presence. The large-format bear is a presence. 48 cm of structured wood, an imposing mass on your wall, a head observing the room. Made from 5 mm plywood – thicker than our standard formats – to hold the tension of a large format without bending.
This is the model for large walls: living room wall, fireplace, chalet entrance. For spaces that can carry something this strong.
Technical specifications
- Dimensions: 48 × 45 × 36 cm (support included)
- Material: 5 mm plywood, laser cut (reinforced thickness for this large format)
- Numbered parts + assembly instructions included
- Assembly without glue, without tools — parts slot together under pressure
- Wall mounting: invisible oblong hole once installed
- Handmade in France, in our workshop in Bourg-d’Oisans
- Dispatch within 24/48 hours
Large format or small format?
If you're hesitating between the two versions: the 30 cm format (30×28×21 cm) suitable for intimate spaces — office, bedroom, apartment entrance. This large 48 cm format is made for walls that deserve a strong focal point. Same plywood, same workshop — but in 5 mm instead of 3 mm to absorb the tensions of the large format.
Questions fréquentes
Why is this large format in 5 mm plywood and not 3 mm?
The larger the room, the more rigid the pieces need to be to hold the assembly over time. We use 5mm plywood for this large format to ensure structural strength and prevent any deformation. It's a quality choice, not a cost-saving one.
Is this 3D bear puzzle difficult to assemble?
No. The parts are numbered and the assembly instructions are illustrated. Estimated assembly time: approximately 15 minutes. Suitable for ages 14 and up. No tools or glue required.
How do I hang this large print on the wall?
An oblong hole is integrated into the rear mount. Rests on a nail or screw suitable for the weight (we recommend a screw + plug for this large size). The fixing is invisible from the front.
Is this product made in France?
Yes. Laser-cut and engraved in our workshop in Bourg-d’Oisans (Isère). Hand-sanded and checked before shipping.
What are the delivery times?
Made and dispatched within 24/48 hours of your order. Email with tracking number upon dispatch.
3D Mountain Workshop From Bourg-d’Oisans, at the foot of Alpe d’Huez, each piece is born in our workshop: the laser cuts with precision, the hand sands, checks and assembles.
→ See our full collection: 3D wooden animal heads
Reviews
There are no reviews yet.